Skip to main content

  

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$22.00
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g
$150.00
Additional child seat for your SuperCargo! Complete with a three-point harness, a waterproof soft back and Mini Soft Spot seat cushion, your child will safe & comfy on the ride. Easy to install and durable enough to stand up to your lifestyle. - Compatible with Supercargo CL, Supercargo and Supermarché models. - Requires the Bamboo Box. Included: - Moulded Backrest - Mounting Hardware - Mini Soft Spot - Seat Belt - Compatible with the Bamboo Box only, not compatible with the Open Loader.
$200.00
Confidently haul your most precious cargo, safely inside the Adjustable Monkey Bars. Parents love this awesome Add-On for all our long tail style cargo bikes because it provides a place for idle hands and peace of mind all at once. Great for kiddos who are old enough for the “big kid” seat on the rear rack, but are easily distracted or take naps on the ride. The Adjustable Monkey Bars are totally compatible with the Yepp Maxi child seat and most of our other Add-Ons. The new adjustable design allows more versatility with your rear rack. With the easy to use snap pin attachment system the bars can come and go as quickly as your cargo changes. This new feature also makes storing your cargo bike in a tight space much easier. - Aluminum - Multiple passenger (Kiddos) - Compatible with one Yepp Maxi child seat and most Yuba Add-Ons - Hardware and soft bar tape included - 2 Year warranty - Compatible with Spicy Curry, Sweet Curry, Boda Boda, Electric Boda Boda, Boda Boda Original, Mundo LUX and Mundo Classic.
$150.00
The Baguette was designed with a few things in mind, being weatherproof, sturdy, light and making your bike a better looking more practical cargo carrier. For starters, we have made the new Baguette with a roll top waterproof closure system, with absolutely no holes for water to sneak through. Combined with sealed seams and water resistant zippers this bag will protect your cargo no matter the conditions. For the appearance we have used a tweed pattern on the outside panel to give you the looks to complement your Yuba cargo bike. - Colors: Black and tweed - Capacity 8 gallons (36 liters) - Sealed seams and zippers for weather proofing - Made out of 1000D Nylon fabric (waterproof) - Hard plastic bottom and rear panel for added stiffness - Outside zipped pocket - Replaceable clip system - Shoulder strap for tote bag conversion - 2-Year Warranty - Not compatible with Bamboo Utility Deck on Mundo V4 and older.
$40.00
The Rear Deck for the Spicy Curry or Boda Boda gives passengers a place to ride along or provides sturdy support for your cargo. Pair with the Bamboo Running Boards for a super stylish look to your cargo bike. - 5 Ply Bamboo - Weather resistant - Cut out for the Yepp Maxi child seat to attach directly to the rear deck - Quick 6 bolt attachment - Only compatible with Spicy Curry, Sweet Curry and the Boda Boda cargo bikes - We choose to use 3-ply Bamboo for some of our accessories because it is a durable and sustainable material. Bamboo requires little water or other resources to mature and grows quickly with Wolverine like healing capabilities. All of our Bamboo products have been tested for hazardous or harmful chemicals in congruence with EU REACH regulations and passed with flying colors. We are fully REACH compliant.
$120.00
These sleek running boards create a platform for passenger to rest their feet in style while they enjoy the ride and take in the scenery. We choose to use Bamboo for our SideBoards because it’s an extremely durable material that will stand up to your lifestyle. It’s also a very sustainable material, requiring little water or other resources to mature and growing quickly with Wolverine like healing capabilities. - 5 Layer Plyboo - Easy to install, two snaps and four spacing bolts - Can also be used as side boards to create truck bed on top of carry-ons - Cut outs along the side for easy strap attachment points - Hardware included - 2-Year warranty - Spicy Curry & Sweet Curry only!
$25.00
Take a load off, quick. Introducing new Quick Release skewers for mounting the Bread Basket to your Yuba Cargo Bike. Now you can install or uninstall your Bread Basket with the turn of a quick release. Included: - Durable 6mm diameter steel skewers - Two cam washers for use with and without the Roots Kickstand (still in production). Compatible with Mundo V5, Boda Boda V3 and Spicy and Sweet Curry bikes. They can also be used on the Boda Boda V2 with a couple of spacers and the Mundo V4 with spacers and a slight frame modification.
$20.00
Tie-down with steel buckle perfect for attaching boxes, surfboards, guitars, tools, and other bikes to a Yuba. - Each strap 9 feet (3 m.) long - Industrial quality - Brown - 1 pair per pack - Compatible with all Yuba Cargo Bikes
$150.00
Easily haul your life around on your Yuba Mundo Cargo Bike with the Go-Getter, a spacious, top-quality, pannier-style cargo bag. It features dual side pockets with reflective hook-and-loop straps for safety and storage and is made with tough, durable, weather resistant materials. The Go-Getter easily clips to either side of the utility rack and comes standard with a handy shoulder strap for when you’re on the go and includes many little pockets inside to keep your stuff organized. With the capacity to hold two grocery bags, the Go-Getter Bag can carry anything life throws at you. Haul backpacks, gym clothes, science projects, and the groceries all at the same time. With a handy hook-and-loop divider, you can keep the class pet away from your spinach on your ride home. - Capacity: 85 Liters - Colors: Black & Grey - Weatherproof - Comes with replaceable clips - Aattaches to the Left or Right side of the rear rack - Can be used with other longtail bicycles - Compatible with all versions Yuba Mundo and elMundo - 2 year warranty - Weight: 5 pounds
$200.00
Designed to protect & carry your precious cargo, the Grab & Go bag fits perfectly in the Bread Basket and is a “must-have” add-on for all Yuba owners. Take it directly from the bike to your shoulder to a shopping cart – and then back to the bike with no hassle or need for disposable store bags. This amazing bag comes with a removable shoulder strap, and can handle up to 30 lbs of groceries, take-out food, camping gear, library books, beach toys or other items. The Grab & Go features a durable, waterproof material to secure and protect its content from the elements. Two small side pockets are perfect for small items such as carrying your Cargo Straps while on-the-go. Its roll-top system cinches the bag tight to help ensure everything inside stays put while riding. While the Grab & Go fits perfectly in the Yuba Bread Basket, it can be a great addition to other front baskets as well. Check the dimensions below to see if it will fit your bike basket. Color: Tweed with dark grey Sealed seams for weather proofing Made out of 1000D Nylon fabric (waterproof) Reinforced base for added stiffness Shoulder strap included 2-year warranty Dimensions: 12.5”x8”x17”
$120.00
Give your passengers a comfy resting place for their feet or support your cargo load with a pair of stylish Bamboo Sideboards on your Kombi Cargo Bike. We choose to use bamboo for our Running Boards because it’s an extremely durable material that will stand up to your lifestyle. It’s also a very sustainable material that grows quickly and requires very little water or other resources to reach maturity. - Only compatible with the Kombi - Easy installation - 5-ply Bamboo
$40.00 - $50.00
Soft Spot is a sturdy, washable, and weatherproof seat cushion for your passengers. Available in two sizes to fit all bike models (Soft Spot and Mini Soft Spot), the Soft Spots offer a comfy backseat ride for all occasions and passengers. Mini Soft Spot dimensions: 31 x 18 x 5 cm (12.2 x 7 x 2 inches) Covers half of the rack on a Kombi, Kombi E5, Spicy Curry AT, Spicy Curry, or a Boda Boda * Covers 1/3 of the rack on a Mundo Lux, or Mundo Electric. * Compatible with the Yepp Maxi EasyFit and the Adjustable Monkey Bars Standard Soft Spot dimensions: 40 x 19 x 5 cm (15.7 x 7.5 x 2 inches) * Covers half of the rear rack on the Mundo Lux and Mundo Electric. * Covers part of the rear rack of the Kombi, Kombi E5, Spicy Curry, Spicy Curry AT, and Boda Boda – we recommend using 2 Mini Soft Spots on these bikes instead. * Compatible with the Yepp Maxi EasyFit and the Adjustable Monkey Bars
$100.00
The Stand Together Kickstand offers a large, stable base for loading up all kinds of precious and traditional cargo. And just like its name implies, this kickstand is all inclusive; happily mounting to all the rear loading cargo bikes in our line-up. One for all! - Folds underneath the Sideloader bars - Three mounting holes options - Chromoly Steel - Color Silver - 2-Year Warranty - Compatible with Mundo V3 and up, Spicy/Sweet Curry AND Boda Boda
$69.00
The Soft Spot offers your passengers a comfortable padded seat that’s easily installed on the rear rack of the Yuba Mundo, the Boda Boda, or the Spicy Curry. - Installs easily with fabric hook-and-loop fasteners - Covers half the rear platform length on the Mundo and Spicy Curry, and the entire platform on the Boda Boda - Use two soft spots to cushion two adults or three kids - Compatible with Yepp Maxi EasyFit - See Mini Soft Spot if you’re carrying two kiddos on a Boda Boda or Spicy Curry
$40.00
Custom Yuba Bracket for attaching Yepp EasyFit child seats to the Mundo V3, V4, or Boda Boda V1 or V2. - Silver - Install on the rack with or without deck - Includes hardware - 2-Year Warranty - Not required for Spicy Curry, Mundo V5, Boda Boda V3
$40.00
- Heavy duty double-ended steel lockring wrench - 10.5" long for plenty of leverage - Fits most bottom bracket lockrings
$42.00
- Made in U.S.A. (Maysville, KY) - Shallow baskets carry notebooks, boxes or other articles that lie flat - Dimensions: 15 x 10 x 4.75 inches; the basket tapers to 13 x 8 inches at the bottom - Extended handlebar clamps fit 7/8" and 1" diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables - Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs - 1372 has a Zinc plated finish; 1372GB has a Black Powder Coat Finish - Complete basket with fittings weighs 2.2 lbs.
$46.00 - $48.00
• Made in U.S.A. (Maysville, KY) • Shallow baskets carry notebooks, boxes or other articles that lie flat • Dimensions: 18 x 13 x 6 inches; the basket tapers to 15.75 x 10.5 inches at the bottom • Extended handlebar clamps fit 7/8" and 1"diameter handlebars, and 1 3/4" apart to offer clearance for shift and brake cables • Baskets have 2-piece legs which extend from 14 inches to 22 inches and mount to either the axle or fork eyelets on bikes with quick release front hubs • 1392 has a Zinc plated finish and 1392GB has a Black Powder Coat Finish • Complete basket with fittings weighs 2.6 lbs.
$80.00 - $84.00
The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.
$25.00
- Made in U.S.A. (Maysville, KY) - Dimensions: 20.5 x 13 inches - Extended handlebar clamps are 2" apart, allow greater clearance for shift and brake cables, and fit 7/8", 1", and 1 1/4" diameter handlebars - Legs extend from 13 3/4" to 21 1/4" and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - Powder Coat Finish - Complete rack with fittings weighs 6.0 lbs.
$52.50
This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself. - Extended handlebar clamps allow greater clearance for shift and brake cables - Requires 3.5" of handlebar clearance for mount - Fits 7/8" to 31.8mm handlebars - Made in USA - Dimensions: 11.75 x 8 x 9"
$52.50
This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers. Available in white (3133WH) or gloss black (3133GB) powder coat finishes. - Made in U.S.A. (Maysville, KY) - A Quick Release Basket with Bolt-on Holder for stable installation and use - Lift the handle to remove the basket and take it with you - Basket locks back in place when returned to the holder - Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom - Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar - Handlebar clamps are 2" apart and offer clearance for shift and brake cables - Powder Coat Finish - Complete basket including the holder weighs 3 lbs.
$69.99
Wald's big boy rear twin carrier offers tremendous amounts of cargo capacity. The 535 Twin Rear Carrier Basket lets you haul a reusable grocery bag in each basket with room to spare. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry your groceries, gear, computer, or backpack with greater comfort and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - 7.5 x 18 x 11 inches; taper to 5 x 16 inches at the bottom - Rack is 5" x 16" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 535 has a Zinc Plated Finish; 535GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.2 lbs.
$28.00
The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA
$12.00
- Versatile mini fenders work with almost any casual bike - The #80 fits tire widths of 1.25-1.375" - Single splash guard
$40.50
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
$34.75
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
$38.00
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds. - The Wald Training Wheels fit 16- to 26-inch bicycles. - The Wald Training Wheels support riders up to 125 pounds.
$12.00
This elastic net secures awkward loads to bike racks, or it serves as a hammock for your cat. These may vary slightly from the photo since we get them from a couple of different suppliers, but they all work equally well. Approx. 14" x 15" unstretched.
$95.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$8.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$165.00
The VO Porteur Rack is a traditional-style rack as used on the famed Parisian newspaper delivery bikes. Those Parisian delivery bikes were reputed to carry as much as 110lbs. of newspapers on similar racks (of course, the bikes had strengthened frames and forks, not just racks). Our Porteur Rack is made from strong stainless steel tubing and polished to a lovely shine. It won't rust like painted steel racks or fatigue and crack like aluminum racks. The quality is actually superior to that of many custom racks. In short, this is a real load-carrying rack, not an aluminum "style-rack". Yet total weight with rail, nuts, bolts, etc. is only 1.079kg. The platform is about 36cm x 29cm. A removable rail attachment is included and very handy for smaller packages. The tangs are pre-drilled to fit 700c, 27", 26", and 650b bikes. There are four bosses for a light attachment. There is a boss for securing your fender to the rack -- no rattling! Please also note the elegant pannier/tie-down loops above the mounting tangs. Mounting hardware is included. The Porteur Rack mounts to the dropout eyelet and the brake bolt (or fork crown hole). Max weight with this configuration is 25 lbs.
$14.00 - $16.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$95.00
These fenders feature an art-deco, zeppelin profile and are available in high polished silver and smooth Noir. They're 52mm wide for 650b wheels with tires up to 44mm wide. They are 52mm wide for 700c and 27" wheels, and work with tires up to 42mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders. - Fenders are made from aluminum alloy for strength while staying lightweight - Rear fender is 120cm long and the front is 90cm long - Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount - Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed - eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions - Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions. Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build. Read the instructions to make sure your frame and fork has the correct mounts and hardware needed.
$60.00
Ursus JUMBO KICKSTAND (300mm length): Finally, a no-hassle kickstand that does the job of holding up your bicycle! The Ursus Jumbo 80 Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 100kg. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. If you ride with a children's seat on your bicycle, URSUS Jumbo Kickstand is a must-have item to keep your bicycle from tipping over when you stop at the park or the ice cream parlor with your child. 300mm length.  Weighs 1180 grams. Made in Italy. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
$38.00
The Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. Kickstand length is 300 mm. BIG FOOT is designed to work with 28" wheeled bicycles. In order to fit this to your bike, you need to check if you have a kickstand plate welded to your bike frame. This can be found just behind the bottom bracket. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
$38.00
Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.
$12.00
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
$60.00
Ursus Jumbo Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 170 lbs. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. The distance between the two legs when legs are expanded is 40cm (15.7").
$25.00
The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. Intended for bikes with an 40mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.
$22.00
LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!
$145.00
The Tara is the most durable, most versatile lowrider rack Tubus makes. It has been Tubus' best selling front carrier for more than 18 years, and Tubus has been improving it along the way. It's incredible strength comes largely from its massive 14mm chromoly main tube and simple design. When used in combination with the Cargo, Tara is the perfect match for long-distance biking. - Separate eyelets for mudguard mounting are also included - For the fat tire applications, see the Tubus Tara Big Apple - Weight: 500 grams/17.6 ounces incl. hardware - Capacity: 15kg/33 pounds - Wheel Size: 26-inch/700c *Not suitable for mounting on suspension or carbon forks without eyelets. Be sure your fork is approved by the manufacturer, or by the bicycle manufacturer for the installation of a rack.
$9.00 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$12.00
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$36.00
Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.
$25.00
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
$60.00
Topeak's Compact Handlebar Bag holds plenty of gear for on-the-bike use and it converts into a fanny pack when you're off the bike. It's great for anything you want to keep close at hand. It features a divided main compartment to keep your gear organized. Plus, the Compact comes equipped with Teflon coating and a full rain cover for when conditions are less than ideal.
$38.00
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$62.00
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap onto your big-wheeled bike. It's made of tubular aluminum, fits most bikes with disc brakes, hauls up to 55 pounds and has a center strip that acts like a short fender. It's compatible with Topeak's QuickTrack bags and accessories (sold separately), too.
$7.95
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz
$55.00
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061-T6 alloy construction - 625g - 55lb weight capacity
$7.00
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$110.00
Topeak's MTX Trunk DryBag EX is perfect for commuting and running errands year round, in any weather. This dry bag is fabricated from tough, sonically welded and seam-sealed nylon with a roll-top closure making it fully waterproof. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). Added features include reflective highlights and shoulder strap making easy to carry when it's off your bike.
$84.95
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
$99.99
Topeak's MTX TrunkBag EXP boasts a large main compartment and expandable side panniers to carry plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).
$120.00
Topeak's Pannier DryBag DX is crafted with fully seam-sealed and sonically welded 420/840 denier nylon with a roll-top closure for maximum protection in the nastiest conditions. Slideable hooks let you place the bag exactly where you want it on your rack, and the quick-release system makes installation and removal a breeze. Well-thought-out details include reflective accents for visibility as well as a handle and a shoulder strap for easy off-bike carrying.
$60.00
Topeak's RX BeamRack is a lightweight seatpost rack with side frames for on-road use. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 15 pounds.
$16.00
Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.
$16.50
Perfect for trailside repairs and for your home shop, Topeak's Universal Chain Tool is compatible with all chains and removes and installs pins with ease. Plus, there's even a compartment to hold spare pins, an integrated chain pin breaker and a removable chain hook to hold your chain while you work.
$11.95
Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)
Page 1 of 10 Next page