Filter By:
- Children's-Bike Accessories (7)
- Child Seats (16)
- Electronics (13)
- Eyewear (5)
- Fenders (20)
- Hydration (19)
- Lighting (47)
- Locks/Security (64)
- Show More Categories
- Packs/Racks/Baskets (178)
- Pumps/Inflation (25)
- Safety (34)
- Storage (13)
- Tools/Maintenance (87)
- Other (51)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
$34.75
Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.
$38.00
Wald's 742 training wheels feature three slots on the brace arm allowing this wheel set to mount on most single speed bicycles with 16- to 26-inch wheels. The brace arms are designed to fit rear frames tubes up to .75 inches in diameter. This model is intended for use by riders weighing up to 125 pounds.
- The Wald Training Wheels fit 16- to 26-inch bicycles.
- The Wald Training Wheels support riders up to 125 pounds.
$12.00
This elastic net secures awkward loads to bike racks, or it serves as a hammock for your cat.
These may vary slightly from the photo since we get them from a couple of different suppliers, but they all work equally well. Approx. 14" x 15" unstretched.
$95.00
These fenders feature a classic hammered pattern and are available in high polished silver and smooth Noir. They're 45mm wide, designed for 700c and 27" wheels, and work with tires up to 35mm wide. We include a hardware kit to work with almost any type of mounting in the same finish as the fenders.
- Fenders are made from aluminum alloy for strength while staying lightweight
- Rear fender is 120cm long and the front is 90cm long
- Both come pre-drilled for stays. Front is pre-drilled for a fork crown mount
- Hardware kit includes: 5mm polished aluminum stays, R-clips and screws, L bracket, reinforcement plates, stay-to-fender closed eyelet bolts, fork crown daruma, sliding bracket, leather washers, and detailed installation instructions
- Velo Orange fenders are designed to be full coverage, which means that you and your bike's drivetrain will stay clean of road muck and grime. Both front and rear fenders have full wrap around the width of your tires to eliminate spray in all directions.
Please note: We include most if not all of the hardware you need for the installation of our fenders on the vast majority of bikes, but in that the kit is as universal as possible, you may need one or two bits of hardware for your particular build.
$8.00
Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount
(Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)
$14.00 - $16.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris.
- Mounts to the back of the fork crown via brake bolt or through bolt
- Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers
- Use Sheldon's Fender Nuts to work with recessed brake bolts
- Rust resistant and includes all required brackets and hardware
- Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$8.00
- Pedal thread inserts are used to replace damaged threads in cranks
$22.00
Even the best can be better.
The first version of this kickstand had been conceived, designed and manufactured by URSUS in 2005. There wasn’t any similar product, incredibly resistant and aesthetically beautiful, 100% MADE IN ITALY: very soon it became a bestseller and we protected it with an international 20-years patent. We still ship 9 million pieces per year all over the world.
After about 10 years, we restyled our bestseller to make it even better by adding an enlarged crank bumper to ensure better protection against impacts, and a bigger foot, designed to easily adapt to any kind of ground surface.
$60.00
Ursus JUMBO KICKSTAND (300mm length): Finally, a no-hassle kickstand that does the job of holding up your bicycle! The Ursus Jumbo 80 Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 100kg. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. If you ride with a children's seat on your bicycle, URSUS Jumbo Kickstand is a must-have item to keep your bicycle from tipping over when you stop at the park or the ice cream parlor with your child.
300mm length. Weighs 1180 grams. Made in Italy.
Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
$38.00
The Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. Kickstand length is 300 mm. BIG FOOT is designed to work with 28" wheeled bicycles.
In order to fit this to your bike, you need to check if you have a kickstand plate welded to your bike frame. This can be found just behind the bottom bracket. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.
$38.00
Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.
$12.00
The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.
$60.00
Ursus Jumbo Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 170 lbs. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. The distance between the two legs when legs are expanded is 40cm (15.7").
$28.00
Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (40 mm PLATE)is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.
Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstay.
$25.00
The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike.
Intended for bikes with an 40mm integrated mount at the rear dropout.
55 lbs capacity. Made in Italy.
Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.
$22.00
LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo.
*Please Note: Do NOT mount on suspension forks!
$145.00
The Tara is the most durable, most versatile lowrider rack Tubus makes. It has been Tubus' best selling front carrier for more than 18 years, and Tubus has been improving it along the way. It's incredible strength comes largely from its massive 14mm chromoly main tube and simple design. When used in combination with the Cargo, Tara is the perfect match for long-distance biking.
- Separate eyelets for mudguard mounting are also included
- For the fat tire applications, see the Tubus Tara Big Apple
- Weight: 500 grams/17.6 ounces incl. hardware
- Capacity: 15kg/33 pounds
- Wheel Size: 26-inch/700c
*Not suitable for mounting on suspension or carbon forks without eyelets. Be sure your fork is approved by the manufacturer, or by the bicycle manufacturer for the installation of a rack.
$9.00 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$12.00
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$36.00
Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.
$25.00
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position.
- Clamp: Fits 22-38 mm tubes (shims included)
- Crossbar: Device mount bar 25.4 mm
- Material: Engineering Grade Plastic and Steel
- Mount: Handlebar, Handlebar Stem
- Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded)
- Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open)
- Weight: 116 g / 4.08 oz
$60.00
Topeak's Compact Handlebar Bag holds plenty of gear for on-the-bike use and it converts into a fanny pack when you're off the bike. It's great for anything you want to keep close at hand. It features a divided main compartment to keep your gear organized. Plus, the Compact comes equipped with Teflon coating and a full rain cover for when conditions are less than ideal.
$38.00
Topeak's DeFender XC11 for 29ers is a rear fender that offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.
$55.00
- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags
- Integrated fender top
- 6061-T6 alloy construction
- 625g
- 55lb weight capacity
$64.00
- Specifically designed for 29" mountain bikes and larger volume 700C wheels
- Compatible with bike frames equipped with disc brakes
- Tubular aluminum rear rack for loaded touring
- MTX 2.0 QuickTrack compatible with all MTX Trunk Bags or MTX rear baskets
- 6061 T-6 hollow aluminum
- 55lb weight capacity
- 680g
$110.00
Topeak's MTX Trunk DryBag EX is perfect for commuting and running errands year round, in any weather. This dry bag is fabricated from tough, sonically welded and seam-sealed nylon with a roll-top closure making it fully waterproof. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). Added features include reflective highlights and shoulder strap making easy to carry when it's off your bike.
$84.95
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips.
- Attachments: 1 divided main compartment, two mesh side pockets
- Capacity: 8L / 480 ci
- Added Features:
Water bottle holder Shoulder strap
Carrying handle
Elastic top bungees
3M reflective strip
Safety light clip
Optional rain cover
- Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5”
- Weight: 870 g / 1.92 lb
$99.99
Topeak's MTX TrunkBag EXP boasts a large main compartment and expandable side panniers to carry plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately).
$60.00
Topeak's RX BeamRack is a lightweight seatpost rack with side frames for on-road use. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 15 pounds.
$16.00 - $34.95
Topeak's Smartphone DryBags are a great way to keep your smartphone handy for communication or to use as a GPS during longer rides. This pack features a foam body for protection from bumps and a clear touchscreen-compatible window for viewing your phone's display.