Other

The Storm Shield is a weather-resistant canopy that keeps the elements out, the good vibes in, and kids' complaints at bay. Combine with the Clubhouse+ or Clubhouse to protect passengers from rain, snow, and wind. It gives little ones a cozy place to sit (or sleep) when bad weather hits, and can also be used for sun protection on high UV days. - Protects young passengers from the elements-makes every day a great day to ride - Carry up to two kids, in or out of child seats - Fits kids up to 140cm tall (plus room for helmets) - Waterproof nylon material keeps kids dry, while ventilation panel keeps them comfy - Roll up the side panels on warm, sunny days - Designed for wind resistance - Reflective accents for safer riding - Add the Storm Box (not included) for even more weather protection - Requires the Clubhouse+ on the GSD Gen 2 - Requires the Clubhouse on the GSD Gen 1

The Storm Shield Mini is a weather-resistant canopy that keeps the elements out, the good vibes in, and your kid's complaints at bay. Protect your passenger from rain, snow, and wind-or roll up the side panels on sunny days to let your little one enjoy both fresh air and shade. - Protects your young passenger from the elements - Fits one kid up to 140 cm (4'7") tall (plus room for a helmet) - Inner pocket for wrangling snacks, toys, and other gear - Reflective accents and rear loops for safety lights help keep you visible - Requires the Clubhouse Mini* for installation - Part of the Clubhouse Fort Mini-an all-weather protected compartment for a child passenger *On the HSD, Quick Haul, and Short Haul, the Storm Shield Mini may be used with the Captain's Chair + Sidekick Joyride Bars combo instead of the Clubhouse Mini, if the rider is 170—190 cm (5'7"—6'3") tall. Otherwise, the Joyride Bars won't be at the height needed to use the Storm Shield Mini.

- Chainstay-mounted adjustable kickstand - Adjusts to be compatible with 24" to 29" bikes - Large rubber/plastic boot provides a stable stand platform

This plug-in throttle mounts next to your HMI on your Globe bike and allows you to motor up to 20mph without needing to pedal. Need to go faster? Pedal assist will still be there to give you a boost to 28mph after the throttle reaches its limit. The throttle’s extra burst of torque makes entering and exiting traffic safer and faster but still allows you to use pedal assist to increase efficiency and range. - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - Max throttle speed: 20mph. Does not affect pedal-assist performance or top speed. - Requires installation of the free Globe phone app to activate.

Keep your pants clean with SKS's Chainboard chain guard. This handy device bolts onto the chainstay and bottom bracket, and utilizes a telescoping design to fit a wide variety of frames.

Set of 8 SKS stainless fender drawbolt/nuts

Converts quill style forks to use threadless stems.

Applications: - Center Kickstand - Push spring movement - Aluminium-die cast GD-AlSi9Cu3 Delivery: - incl. screw and washer - Optional: plate - Kickstand Shoe pair optional Material: - Powder-coated black/metallic silver - Pin steel hardened, galvanized - Screw M10x55 - Washer galvanized F6 Specifications: - Support 58x31x66 - Strut length L1 Modell S 290/26" - Strut length L1 Modell L 320/28" - max. Strut length 28" - Weight Modell L 542g - max. Load 25kg

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA. - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S. - Fits tube sizes up to 7/8" in diameter - Certified Non-Corrosive Casting - Snap Action Mechanism - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)

Features - Non E-Bike rear-mount kickstand - Adjustable leg assures the perfect fit for all frame sizes (Non E-Bike) Fits: - Seek - 2013-2016 - Roam - 2013-2018+ - Rove - 2013-2018+ - Enchant - 2017+ - Escape Disc - 2017+ - BeLiv - 2018+ - BeLiv City - 2018+ - ATX - 2018+ - ARX - 2018+ - FastRoad 2017 - AnyRoad Adv - 2018+ - Talon- 2018+ - Alight- 2018+ - Tempt- 2018+ - Thrive- 2018+ - Sedona DX- 2018+ (Does NOT fit Sedona or Sedona W)

Clear stick on chainstay and frame protectors.

For Brompton bikes only Often useful, especially on public transport, the zip-up Brompton Cover is quick to fit and remove with an elasticated hem for a secure fit around the bottom of the bike. It fits nicely on all Brompton bikes, including Brompton Electric.

Keep your bike safely upright and at the ready with the Bontrager Adjustable Bracket-Mount Kickstand. The included hardware and mounting plate makes installation simple, and the center-mount design works with most bikes. Adjustable length adapts for bikes with 24" to 29" wheels and provides a stable upright position. - Center-mount design uses a top plate to clamp the kickstand to the frame near the bottom bracket - Adjustable height fits bikes with wheel sizes ranging from 24" to 29" - Sturdy alloy construction - Includes all required hardware and mounting plates

Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Benno Dual leg kickstands help keep the Boost E and Carry On models stable for easier loading of cargo. Integrated roller prevents chain interference with the kickstand. - Fits Benno Boost E and Carry On models only

The Benno Baby Seat Adapter is designed to connect the Yepp Maxi Easyfit Baby Seat with to selected Benno Racks. - Maximum weight of child is 40lbs/18kg

A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Vent zipper can be opened if hands start to overheat - Measures 10" wide by shifters/brakes

A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands - Opening measures 8.5" across

The Mini Soft Spot is the perfect one-passenger padded seat on any of Yuba's cargo bikes. Pair two Mini Soft Spots to fully cover the whole rear rack of Spicy Curry, Kombi, Kombi E5, Fastrack, or Boda Boda V3. It's also great on any of Yuba's cargo bikes when you want to save some of the rear rack real estate for other kinds of cargo. The Mini Soft Spot is easily installed on the rear rack with hook-and-loop fasteners and is sturdy enough to stand up to your family’s busy cargo bike life. - Installs easily with fabric hook-and-loop fasteners. - Seating for one passenger - Pair two Mini Soft Spots on Spicy Curry, Boda Boda V3, Kombi, Kombi E5, or Fastrack for full coverage. - Compatible with Yepp Maxi EasyFit - Weight: 2 pounds - Dimensions: 12 x 6 x 3 inches