Tools/Maintenance

- AM5200: specific tool for ACS Crossfire freewheels, fits over both 3/8" and 14mm axles - AM5201: spanner wrench for Crossfire and universal 4-slot freewheels - AM5203: specific to Paws, Paws HD, Paws 4.1 and gray Southpaw freewheels. A reinforcement ring inside the prongs allows firm centering and maximum torque. Tool is NOT compatible with CLAWS, SHIMANO, and some other freewheels - AM5205: universal 4-prong that fit Claws, Fat, Southpaw, Shimano, Dicta, and other 4-slot freewheels

Radio Pliers

- Freewheel remover for use with single speed 4-key freewheels - Can be used with a 24mm wrench - Compatibility: 4-Key

- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air

Award winning companion. Brompton Toolkit. Compact. Lightweight. Everything you need to fix a puncture and make running repairs and adjustments. The Brompton Toolkit contains everything you need to fix a puncture and make running repairs and adjustments to your bike. It fits discretely within the front frame tube such that, when the bike is in use, the toolkit is fully enclosed and safe within the frame. Includes Tyre levers with 8mm and 10mm spanners 15mm spanner with ratchet driver Pozi and flat screwdriver bit Puncture repair patches Sandpaper 2.5mm and 5mm hex bit 3mm and 4mm hex bit 2mm and 6mm hex bit Weight 180 grams (approx.) Fitting Fits inside the front frame tube in a neat, enclosed package Note The Toolkit is not compatible with bikes built prior to 2004, as these have a shorter wheelbase than current bikes

A cream to help assist the break-in process and keep leather supple, specially formulated from natural ingredients to condition, preserve and shower-proof your saddle. Proofide is the only substance that should be used to care for your Brooks Leather Saddle, specially formulated from natural ingredients to condition, preserve and showerproof. Apply a little of this leather saddle cream to the finished side of the leather. Allow to permeate until dry and then polish off. Also apply Proofide to the underside of the saddle, but leave this coating on to protect against dirt and moisture. It should be used several times during the ‘breaking-in’ period and periodically (3-6 months) thereafter. It is recommended to polish the saddle with a soft cloth before first use.

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

Feedback Sports Cassette Pliers are so user-friendly, removing your cassette to service bearings, clean your gears or replace a worn drivetrain is so quick you’ll never hesitate to tackle the task. These innovative, self-adjusting pliers confidently grab any cassette cog up to 26T, on any drivetrain from 1-12 speeds (including track cogs). The long-handled, ergonomic grips manage the most challenging cassette removal with precision and confidence. Cold-forged, hardened CRV tool steel arms put these Cassette Pliers in a category all their own. Perfect for learning bike maintenance, or for veteran mechanics. Available separate, or found in our Team Edition Tool Kit. - Secure, non-slip engagement - Self-adjusting from 11T to 26T cogs - Suitable for 1-12 speed Sram, Shimano and Campagnolo drivetrains - Self-adjusting arms make cassette removal fast and easy - Closure lock keeps tool closed and compact when not in use - Cold-forged and hardened CRV tool steel arms prevent flex - Overmolded file tread handles promote control and comfort during challenging work - Found in the Team Edition Tool Kit - Limited Lifetime Warranty

Finish Line's Fiber Grip Assembly Gel is specially designed to create friction and reduce slippage between clamped carbon fiber surfaces. It eliminates the need to over tighten clamps to achieve secure connections. Plus, it's been tested and approved by leading carbon fiber component manufacturers.

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

- Easy-to-use chain breaker tool - Reversible pin for longer tool life - Replaceable pin - Used for single speed to 11 speed chains - Chain Cutting Tool for single speed up to 11 speed. One for ALL. - Reversible Pin & One Additional Replacement. Total Equal to 4 Sets of Pins - Ergonomic Handle

• Lightweight reinforced nylon construction • Smooth edges won't scratch rims or pinch tubes • Storage clip features built-in abrasive surface

Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included

Origin-8's Steel Core Tire Levers are great for heavy duty use or stubborn tire beads. This set of two carbon steel core levers are coated with high-density nylon and feature built-in spoke hooks for ease of tire removal.

Nickel plated tool - 15mm pedal wrench with PVC grip - 15mm box wrench - 6/8mm allen

The MTC-25 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - Key ring holder - Weight: 94g (3.32 ounces)

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

Park's Hex Wrenches are every mechanic's best friend. They are constructed from industrial quality steel for durability and feature chamfered tips for a precision fit. And, their convenient L shape is perfect for jobs that require lots of leverage or for getting to hard-to-reach bolts.

Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.

Park's Open Ended Metric Wrench is a thin wrench with 9 and 11mm openings so it's perfect for working on the pivot-bolt nuts on sidepull brakes (and derailleurs with hex nuts). This useful tool is nickel plated for durability.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Our iconic spoke wrenches have been a mainstay of our product lineup since we introduced them over 50 years ago. With their simple design and professional quality, they're still the favorite of bike mechanics around the world. Each Park Tool SW-6 is made in the USA, and is heat treated and nickel plated for long service. Park Tool spoke wrenches are vinyl dipped to indicate the size at a glance. • Sized for spoke nipples with 3.7 mm (0.146") wrench flats • This size can be found on some hub-drive e-bikes — always measure to be sure

The Park FR-4 Freewheel Remover fits Atom, Regina, splined Zeus and some Schwinn-approved freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.