Brakes/Levers/Pads

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

Kool-Stop has formulated a new compound with their Continental line of brake pads specifically for composite wheels. They have color matched and fine tuned the perfect compound for Skyway Tuff Wheels! Features: - Special "mag-friendly" compound works great on ALL composite mag wheels - Strongly suggest using the same color brake pad as the mag wheels that you will be using these on! - These are made just like "back in the day" with a small threaded post. Will fit all old-school style caliper brakes. May not work on all V-brakes, however! - Sold in pairs/ 2 pcs. - Rim friendly

Origin-8 Classic Linear-Pull Brakes are a great upgrade or replacement brake for your ride. Available in both front and rear, they feature forged aluminum construction with dual hex screw tension adjustment for simple set-up.

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- Pair of J-Type disc brake pads with fins, for 1 caliper - Available with resin or metallic compound - Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes - Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches - Longer lasting than G-type pads - Interchangeable with F-Type and G-Type pads - Includes spring and pin

Origin-8's one-stop-shop ATB V-brake Kit has all you need to stop your bike: levers, cables, housing, and brakes. For easy installation and set-up, the forged aluminum brakes feature dual spring tension adjustment while the levers sport reach adjustment.

The Problem Solvers Double Barrel Brake Lever lets you operate 2 brakes with this one brake lever. It is made of light, durable aluminum with a steel clamp bolt and aluminum adjusting barrels.

Origin-8's Mini Trigger Lever is a cold forged-aluminum brake lever made for the right side of the handlebars and best suited for tight-bend BMX and riser bars. It has a short lever, a screw for adjusting the reach, an aluminum adjustment barrel, and it comes in many colors to customize your rig.

Shimano Deore XT SM-RT86 6-Bolt rotors feature a 3-layer construction with an aluminum core and two stainless steel outer layers. Reducing rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors, the result is better braking performance and reduced brake fade. - Aluminum spider - Includes rotor fixing bolts and locking washers

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

- Suitable for light use applications - Good performance at low temperatures - High-density ceramic organic compound for extended pad life - Low rotor wear - Extremely quiet

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Our mountain rim brake pads are available both with a threaded or smooth post.

- High performance compounds recommended for all conditions - Steel backing

Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

Magura mdr-c disc brake rotor - 203mm 6-bolt for ebike silver The Magura MDR-C disc brake rotor is an ideal all-rounder – for city, trail and e-bikes. The improved lateral rigidity reduces vibrations and noise during braking, and also has improved heat resistance and increased stability. - Optimized for eBike use - Prepared for tone wheel or magnet - Wear optimized ring design

Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

Magura mt thirty disc brake and lever - front or rear hydraulic post mount black - Carbotecture radial master - Flip-flop, easy bleed design - Carbotecture lever-blade and handlebar clamp - 4-piston forged monobloc caliper - Adjustable reach - Adjustable banjo fitting

The BMX Pad is a top choice for BMX bikes' direct pull brakes. The curved design allows this longer more rigid pad to contour the rim for better brake performance. Features: - Hardened and plated reinforced steel backbone - Patented angled tip plow - Water grooves - Knurl-lock washer system - Available only in Threaded COLORS - Kool-Stop's colored pads are a semi-aggressive compound that will give you good performance in all weather conditions Salmon - Kool-Stop's most famous Salmon compound is also one of their most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. Specifications: - Weight per pair: 61.7 grams - Overall length: 78.5 mm - Pad contact width: 8.5 mm

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

Magura olives (compression ferrule) bag/20 - Small parts used to install hydraulic hose for Magura disc brakes. - Compatible with Campagnolo H11 brake/shift levers

These are excellent replacements for vintage Philips/Raleigh rod brake shoe holders. Exact fit! No trimming needed. Use black for the most authentic look, or salmon for best braking. Premium Quality for original restoration projects and everyday use. Sold in sets of four. Features: - Philips/Raleigh - 2 Pairs/4 Pads - Brand new, not old stock Compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.

These are excellent replacements for vintage Mafac brake shoe holders. Exact fit! No cutting needed. Features: - Campagnolo/Mafac/Weinmann - 2 Pairs/4 Pads - 4 bump style - Brand new, not old stock Specifications: - Weight per pair: 15.2 grams - Overall length: 46mm - Pad contact width: 9.8mm

Shimano H03C Metal Disc Brake Pads keep you in control in any conditions with cooling fins for those endless, grin-inducing descents.. - Fits Saint BR-M820 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Aluminum radiator cooling fins increase pad life and reduce brake fade

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each