Pumps/Inflation

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

- Ball-inflating needle for footballs, basketballs and more

Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.

- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm

Air Force Tier Two floor pump - Ergonomic Handle - 2.5" Analog Pressure Gauge (PSI/BAR) - Simple Valve Smart Head (Presta/Schrader) - All Metal Barrel and Base - Integrated Hose Keeper - 28 1/2" Pump Height

Serfas’ Mini Floor Pump can inflate a tire up to 120 PSI in no time. The Quick Draw head, gauge, and integrated foot peg make pumping up your tire almost effortless. Plus, this lightweight pumps folds up for easy storage when it's not being used. • Folding design for easy storage and carrying • Built-in gauge • High pressure capacity (120psi) • Integrated foot peg for easy control • Quick draw head for Schrader and Presta valves • Weight: 179 grams

CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - All 16g cartridges are compatible with the Airship 2.0

Planet Bike's line of CO2 replacement cartridges makes tire repairs quick and easy. - Planet Bike's CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators. - Planet Bike cartridges are tested to the highest standards for durability, safety, and reliability. They contain pure CO2 with no oils or contaminants. - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2

Give your tires a kiss of air with Planet Bike's Air Kiss CO2 Inflator. It fits Presta and Schrader valves, holds fast thanks to the thumblock head, and inflates in a jiffy. The cartridge is insulated with a sleeve to prevent frozen fingers during use, and the small size means the Air Kiss fits easily in bags, pockets and packs. A 16-gram cartridge is included.

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Lezyne's Micro Floor Drive HP is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg and aluminum construction make it easier than ever to pump up to a maximum pressure of 160 psi. You'll appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility. A frame mount and Speed Chuck is included, too.

Lezyne's lightweight, powerful Pressure Drive mini-pump quickly inflates your tires so you can get back on your bike. Its aluminum barrel and handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use. - Small: 170mm, 89g - Medium: 216mm, 102g *Note: Blue color not available in the United States

One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule

Crank Brothers' Gem Pump packs a powerful punch for its small size and low weight. It'll inflate your tires to 130psi quickly with its dual-piston design. Plus, its aluminum barrel and high-volume/high-pressure (off-road/road tires) settings make inflation easy. The Gem fits Schrader and Presta valves, too.

Keep it classy Extend the hidden hose on the Air Support HP Pro pump, and thread it onto your Presta valve for secure inflation of your road tires. Designed with a smaller volume chamber for higher-pressure tires, this premium pump allows you to quickly inflate tires up to 120 psi. Stow it in your jersey pocket, or use the included bracket to mount it under your bottle cage. Product details - Premium-quality with smaller volume chamber for higher pressure tires - Inflate to 120 psi (8.25 bar) with little effort - Extendable, hidden hose reduces stress at valve when pumping at higher pressures - Threaded head securely locks onto Presta valves - Compact design fits snugly inside jersey pocket - Mounting bracket fits easily under bottle cage

Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included

Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!

This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

This unique mountain bike specific floor pump features a super-sized barrel that inflates tubes nearly 50% faster than normal floor pumps. It delivers the higher volume required for large off-road tires. The extra-sensitive 3" easy-to-read low pressure analog gauge helps dial in the proper pressure while the large steel base provides stability. - TwinHead DX5 works with Presta, Schrader, and Dunlop valves - Oversize padded handle - Barrel/Base: Painted steel - Gauge: 60psi / 4bar, 3” middle mount analog - Volume Per Stroke: 722 cc - Added Features: Attachments for inflating sports balls and bladder heads, Hose dock - Size: 72 x 26.6 x 14.2cm / 28.3” x 9.1” x 6.7” - Weight: 2.3kg / 5.07lb

The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb